Multi-Institutional Audit of FLASH and Conventional Dosimetry With a 3D Printed Anatomically Realistic Mouse Phantom.
Details
Serval ID
serval:BIB_40389E284E3E
Type
Article: article from journal or magazin.
Collection
Publications
Institution
Title
Multi-Institutional Audit of FLASH and Conventional Dosimetry With a 3D Printed Anatomically Realistic Mouse Phantom.
Journal
International journal of radiation oncology, biology, physics
ISSN
1879-355X (Electronic)
ISSN-L
0360-3016
Publication state
Published
Issued date
01/09/2024
Peer-reviewed
Oui
Volume
120
Number
1
Pages
287-300
Language
english
Notes
Publication types: Journal Article ; Multicenter Study
Publication Status: ppublish
Publication Status: ppublish
Abstract
We conducted a multi-institutional dosimetric audit between FLASH and conventional dose rate (CONV) electron irradiations by using an anatomically realistic 3-dimensional (3D) printed mouse phantom.
A computed tomography (CT) scan of a live mouse was used to create a 3D model of bony anatomy, lungs, and soft tissue. A dual-nozzle 3D printer was used to print the mouse phantom using acrylonitrile butadiene styrene (∼1.02 g/cm <sup>3</sup> ) and polylactic acid (∼1.24 g/cm <sup>3</sup> ) simultaneously to simulate soft tissue and bone densities, respectively. The lungs were printed separately using lightweight polylactic acid (∼0.64 g/cm <sup>3</sup> ). Hounsfield units (HU), densities, and print-to-print stability of the phantoms were assessed. Three institutions were each provided a phantom and each institution performed 2 replicates of irradiations at selected anatomic regions. The average dose difference between FLASH and CONV dose distributions and deviation from the prescribed dose were measured with radiochromic film.
Compared with the reference CT scan, CT scans of the phantom demonstrated mass density differences of 0.10 g/cm <sup>3</sup> for bone, 0.12 g/cm <sup>3</sup> for lung, and 0.03 g/cm <sup>3</sup> for soft tissue regions. Differences in HU between phantoms were <10 HU for soft tissue and bone, with lung showing the most variation (54 HU), but with minimal effect on dose distribution (<0.5%). Mean differences between FLASH and CONV decreased from the first to the second replicate (4.3%-1.2%), and differences from the prescribed dose decreased for both CONV (3.6%-2.5%) and FLASH (6.4%-2.7%). Total dose accuracy suggests consistent pulse dose and pulse number, although these were not specifically assessed. Positioning variability was observed, likely due to the absence of robust positioning aids or image guidance.
This study marks the first dosimetric audit for FLASH using a nonhomogeneous phantom, challenging conventional calibration practices reliant on homogeneous phantoms. The comparison protocol offers a framework for credentialing multi-institutional studies in FLASH preclinical research to enhance reproducibility of biologic findings.
A computed tomography (CT) scan of a live mouse was used to create a 3D model of bony anatomy, lungs, and soft tissue. A dual-nozzle 3D printer was used to print the mouse phantom using acrylonitrile butadiene styrene (∼1.02 g/cm <sup>3</sup> ) and polylactic acid (∼1.24 g/cm <sup>3</sup> ) simultaneously to simulate soft tissue and bone densities, respectively. The lungs were printed separately using lightweight polylactic acid (∼0.64 g/cm <sup>3</sup> ). Hounsfield units (HU), densities, and print-to-print stability of the phantoms were assessed. Three institutions were each provided a phantom and each institution performed 2 replicates of irradiations at selected anatomic regions. The average dose difference between FLASH and CONV dose distributions and deviation from the prescribed dose were measured with radiochromic film.
Compared with the reference CT scan, CT scans of the phantom demonstrated mass density differences of 0.10 g/cm <sup>3</sup> for bone, 0.12 g/cm <sup>3</sup> for lung, and 0.03 g/cm <sup>3</sup> for soft tissue regions. Differences in HU between phantoms were <10 HU for soft tissue and bone, with lung showing the most variation (54 HU), but with minimal effect on dose distribution (<0.5%). Mean differences between FLASH and CONV decreased from the first to the second replicate (4.3%-1.2%), and differences from the prescribed dose decreased for both CONV (3.6%-2.5%) and FLASH (6.4%-2.7%). Total dose accuracy suggests consistent pulse dose and pulse number, although these were not specifically assessed. Positioning variability was observed, likely due to the absence of robust positioning aids or image guidance.
This study marks the first dosimetric audit for FLASH using a nonhomogeneous phantom, challenging conventional calibration practices reliant on homogeneous phantoms. The comparison protocol offers a framework for credentialing multi-institutional studies in FLASH preclinical research to enhance reproducibility of biologic findings.
Keywords
Phantoms, Imaging, Printing, Three-Dimensional, Animals, Mice, Tomography, X-Ray Computed, Lung/radiation effects, Lung/diagnostic imaging, Radiometry/methods, Radiotherapy Dosage, Polyesters, Electrons, Bone and Bones/diagnostic imaging, Bone and Bones/radiation effects, Polystyrenes, Acrylic Resins, Butadienes
Pubmed
Create date
22/03/2024 14:20
Last modification date
27/08/2024 7:18